The level measurement on the LPG tank is carried out precisely and without contact by means of a Hall effect sensor, which is mounted on the flange of the existing float instead of the level indicator. The compact transmitter unit is protected and approved for use in ATEX Zone 1 and may be mounted in the manhole at underground tanks, under the protective cover or outside at aboveground tanks. Sensor and transmitter can be mounted on the tank quickly and without complex wiring: Fasten sensor with 2 screws, place antenna with magnetic base, connect transmitter with battery pack – That’s all!

Instantly, the current level value is recorded and regularly transmitted by radio frequency to the desired Radio Receivers.

Application: liquefied gas tank (above/below ground, ATEX zone 1)

Measuring method: non-contact level measurement by means of Hall effect sensor (magnetic field)

Sensor: available with different Hall effect sensors/adapters depending on the level transmitter in the tank (see data sheet)

Commissioning: Simple plug & play activation by plugging together with battery pack

Data transmission: Radio frequency 868.45 MHz, range up to 500 m

Data reception: RCT Radio Receiver LCD Display, Interface Receiver 4-20 mA, LEVELview.WLAN (WiFi), Data logger

Programming: pre-programmed delivery, automatic configuration at first power-up

Cyclic messages: hourly

Housing: absolutely stable, weatherproof for demanding operating conditions, fully encapsulated, protection class IP 67, ATEX zone 1 (electronics), ATEX zone 0 (sensor)

Antenna: external magnetic base antenna with 1.2 m cable for flexible placement on metal surfaces

• Hall effect sensors and adapters
• Batteries
• Antennas
• Radio Receiver LCD Display
• Radio Receiver Interface
• Radio Receiver LEVELview.WLAN (WiFi)
• Data logger REMOTE PROFI GSM

Questions?
Call us or write to us:

T: +49 6462 419880
E: info@r-c-t.biz

Level measurement on water tanks is carried out precisely by means of hydostatic pressure probe or capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shapes: standing or lying cylinder, rectangular tank, above and below ground. Prerequisite is a suitable free tank opening (diameter at least 1″) for sensor installation. The installation of pressure probe or capacitive sensor can be carried out independently of the filling level, even when the tank is full.

Instantly after activation of the transmitter unit, the current level value is measured and regularly transmitted by radio to the desired Radio Receivers.

Application: cisterns and tanks with water/grey water (above/below ground)

Measuring method: precise level measurement by hydrostatic pressure probe / capacitive sensor

Sensor: different pressure probes / capacitive sensor

Commissioning: easy plug & play activation by plugging together with battery pack

Data transmission: Radio frequency 868.45 MHz, range up to 500 m

Data reception: RCT Radio Receiver LCD Display (on request), Interface Receiver 4-20 mA, LEVELview.WLAN (WiFi), Data logger

Programming: pre-programmed delivery, automatic configuration at first power-up

Cyclic messages: hourly

Housing: absolutely stable, weatherproof for demanding operating conditions, fully encapsulated, protection class IP 67, ATEX zone 1 (electronics), ATEX zone 0 (sensor)

Antenna: external magnetic base antenna with 1.2 m cable for flexible placement on metal surfaces

• Pressure probes
• Capacitive sensors
• Batteries
• Antennas
• Radio Receiver LCD Display (on request)
• Radio Receiver Interface Receiver
• Radio Receiver LEVELview.WLAN (WiFi)
• Data logger REMOTE PROFI GSM

Questions?
Call us or write to us:

T: +49 6462 419880
E: info@r-c-t.biz