Transmitter for global monitoring
Web and App
LEVELview.PRO.LPG
Intelligent remote monitoring of liquid gas tank levels (above/below ground, Ex 1) | simple and smart via Web App and Mobile App | modular with various sensors and adapters | quick plug & play installation on existing systems
Functionality
The level measurement on the LPG tank is carried out precisely and without contact by means of a Hall effect sensor, which is mounted on the flange of the existing float instead of the level indicator. The compact transmitter unit is protected and approved for use in ATEX Zone 1 and may be mounted in the manhole at underground tanks, under the protective cover or outside at aboveground tanks. Sensor and transmitter can be mounted on the tank quickly and without complex wiring: Fasten sensor with 2 screws, place antenna with magnetic base, connect transmitter with battery pack. That’s all!
Device, transmission and alarm parameters can be individually configured via the Web Platform and Mobile App.
Features
Application: liquefied gas tank (above/below ground, ATEX zone 1)
Measuring method: non-contact level measurement by means of Hall effect sensor (magnetic field)
Sensors: available with different Hall effect sensors/adapters depending on level gauge in the tank (see data sheet)
Commissioning: simple plug & play activation by plugging together with battery pack
Data transmission: GPRS/LTE/4G/NB-IoT/CATM1 via integrated SIM chip
Data reception: RCT Cloudserver or individual solution; data management via Web Platform & Mobile App
Programming: pre-programmed at the factory; after commissioning, individual configuration of device, transmission and alarm parameters via Web Platform & Mobile App
Cyclic messages: transmission intervals adjustable via Web App; one message includes current fill level and 24 history fill levels, temperature, battery level, signal strength
Alarms: direct alarms from device (limit values 1+2, exceeding, leakage, filling), indirect alarms via Web App (e.g. 2 additional limit values, device and sensor malfunctions)
Accuracy: +/- 2% (Hall effect sensor RCT Junior)
Housing: weather-resistant fiber-reinforced plastic with encapsulation of electronics; protection class IP 67, ATEX Zone 1 (electronics), ATEX Zone 0 (sensor)
Antenna: external magnetic base antenna with 1.2 m cable for flexible placement on metal surfaces
Mounting: two mounting magnets in battery foot
Combinations
- Hall effect sensors and adapters
- Batteries
- Antennas
LEVELview.PRO.OIL
Intelligent remote monitoring of levels in oil, waste oil, diesel, petrol and A1 fuel tanks (above/below ground, Ex 1/0) | simple and smart via Web App and Mobile App | modular with various sensors | quick plug & play installation on existing systems
Functionality
The level measurement on the oil, diesel and fuel tank is carried out precisely by means of a hydrostatic pressure probe or capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shapes: standing or lying cylinder, rectangular tank, above and below ground. Prerequisite is a suitable free tank opening (diameter at least 1″). The installation of pressure probe or capacitive sensor can be carried out independently of filling level, even when the tank is full. Special pressure probes with Ex 0 approval are available for fuels.
Device, transmission and alarm parameters can be individually configured via the Web Platform and Mobile App.
Features
Application: oil, waste oil, diesel, petrol, A1 fuel tanks (above/below ground, Ex 1/0)
Measuring method: precise level measurement with hydrostatic pressure probe or capacitive sensor
Sensors: different pressure probes or capacitive sensor depending on medium and tank parameters
Commissioning: simple plug & play activation by plugging together with battery pack
Data transmission: GPRS/LTE/4G (alternatively NB-IoT, Sigfox, LoRa-WAN) via integrated SIM chip
Data reception: RCT Cloudserver or individual solution
Programming: via Web App/Mobile App
Cyclic messages: transmission interval freely selectable; one message includes current level and 24 history levels, temperature, battery level, signal strength
Alarms: direct alarms from device (limit values 1+2, exceeding, leakage, filling), indirect alarms via Web App (e.g. 2 additional limit values, device and sensor malfunctions)
Housing: absolutely stable, weatherproof, fully encapsulated, protection class IP 67, EX Zone 1 (electronics), EX Zone 0 (sensor)
Antenna: external magnetic base antenna with 1.2 m cable for flexible placement on metal surfaces
Combinations
- Pressure probes
- Capacitive sensors
- Batteries
- Antennas
LEVELview.PRO.AQUA
Intelligent remote monitoring of water levels e.g. in cisterns and tanks (above/below ground) | simple and smart via Web App and Mobile App | modular with different sensors | quick plug & play installation on existing systems
Functionality
The level measurement on water tanks is carried out precisely by means of a hydrostatic pressure probe or capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shapes: standing or lying cylinder, rectangular tank, above and below ground. Prerequisite is a suitable free tank opening (diameter at least 1″). The installation of pressure probe or capacitive sensor can be done independently of filling level even when the tank is full.
Device, transmission and alarm parameters can be individually configured via the Web Platform and Mobile App.
Features
Application: water cisterns and tanks (above/below ground)
Measuring method: precise level measurement with hydrostatic pressure probe or capacitive sensor
Sensor: different pressure probes or capacitive sensor depending on medium and tank parameters
Commissioning: simple plug & play activation by plugging together with battery pack
Data transmission: GPRS/LTE/4G (alternatively NB-IoT, Sigfox, LoRa-WAN) via integrated SIM chip
Data reception: RCT Cloudserver or individual solution
Programming: via Web App/Mobile App
Cyclic messages: Transmission interval freely selectable; one message includes current level and 24 history levels, temperature, battery level, signal strength
Alarms: direct alarms from device (limit values 1+2, exceeding, leakage, filling), indirect alarms via Web App (e.g. 2 additional limit values, device and sensor malfunctions)
Housing: absolutely stable, weatherproof, fully encapsulated, protection class IP 67
Antenna: external magnetic base antenna with 1.2 m cable for flexible placement on metal surfaces
Combinations
- Pressure probes
- Capacitive sensors
- Batteries
- Antennas
LEVELview.MOBILE (with GPS)
Intelligent level and position monitoring of mobile barrels, IBC tanks and containers, e.g. in the chemical and pharmaceutical industry | simple and smart via radio, Web App and Mobile App | quick plug & play installation directly in tank opening
Functionality
This robust transmitter unit offers everything in one: level measurement via capacitive cable sensor, temperature detection of the medium as well as localization of the tank via GPS/cell IDs. The highlight: The device can be mounted and screwed directly in the tank opening of the container. The integrated SIM chip transmits the data worldwide via GPRS. No matter where the tank is, you can keep an eye on all parameters via App. The unit is certified for use in Ex Zone 1/0.
Features
Application: mobile barrels, IBC tanks and containers
Sensor: capacitive cable sensor
Commissioning: simple plug & play activation by connecting to battery pack
Data transmission: GPRS/LTE/4G via integrated SIM chip and radio 868.45 MHz
Data reception: RCT Cloudserver or individual data management solution; RCT Radio Receiver LEVELview.WLAN (WiFi)
Programming: via Web App
Cyclic messages: every 24 hours, transmission time freely selectable, one message includes 24 level measurement values
Transmitted data: AD value (0…9999), level in % (0…99), battery level, GPS data, functional parameters
Alarms: immediately on defined event (e.g. min./max. limits, battery exhausted, temperature limit)
Housing: UV-resistant, gas-tight, fully encapsulated plastic/stainless steel housing, protection class IP65 (IP54 when using a fuse pin), Ex Zones 0/1
Downloads
METERview for gas meters (BK-G2,5 – BG-G100)
Intelligent remote monitoring for gas meters | simple and smart via Web App and Mobile App | direct connection to impulse output of the diaphragm gas meter | quick plug & play installation on existing systems | tamper-proof
Functionality
The METERview Transmitter is simply attached to the side of the gas meter and records the meter impulses without contact via reed contact. By plugging in the supplied battery, the unit is activated and sends the current data to the “RCT Monitor” platform. There the value of the counter and the current counter reading are set as start value. Now the device counts the impulses and transmits them in regular intervals to the RCT Web server for detailed consumption recording and control via the Internet. The device can be secured against manipulation by a lead seal. If it is removed, e.g. for a battery or meter change, a motion sensor detects the vibration and sends a warning message.
Features
Application: Gas meter BK-G2.5 – BG-G100; consumption recording via impulse output
Programming: devices are supplied pre-configured and ready for operation; individual configuration can be done online at any time via the Web App
Data transmission: optionally via mobile network 2G GPRS, CAT-M1, NB-IoT to cloud server "RCT Monitor"
Data reception: RCT Web server (cloud), data management via Mobile App and Web App “RCT Monitor”
Cyclic messages: transmission interval freely selectable; continuous cyclic transmission of acquired meter impulses, battery level, temperature and signal strength
Alarms: direct alarms from the transmitter, e.g. movement/vibration, tampering and battery voltage; indirect alarms via Web App e.g. untypical consumption, no consumption in the cold season, no
meter readings, higher consumption than calculated for prepayment
Housing: absolutely stable plastic housing
Power supply: mains-independent by lithium battery (replaceable)
Downloads
MULTIview – for mobile room and object monitoring
Your mobile solution for quick and easy remote monitoring of rooms, objects and operating states via Web and App | fast and flexible use Plug & Play | monitors motion, temperature, humidity, electricity failure, heating system and much more | ideal for containers, warehouses and production halls, trucks, boats as well as mobile homes, garden and vacation homes
Functionality
The convenient battery-powered transmitter can be used quickly and flexibly anywhere indoors – plug & play. It monitors motion, temperature, humidity and via 2 alarm contacts e.g. door and window contacts, power failure or heating malfunction. By status messages with current measured values and alarms for individually definable events, you are reliably informed anytime and anywhere via the RCT Web App, via push notification or mail and can act immediately.
Once set up, MULTIview can be activated anytime and anywhere simply by plugging it together with the battery pack or deactivated again by disconnecting it. All settings remain stored while the device waits for its next use.
Features
Sensors/connections: motion sensor, temperature sensor, humidity sensor, 2 alarm contacts for connection of potential-free switching contacts or power failure adapter for alarming in case of power failure
Application: in closed rooms
Commissioning: simply plug & play by plugging together with battery pack; can be inactivated/paused at any time by disconnection
Power supply: Battery pack RCT non Ex (incl.); alternatively power supply adapter 230 V for wired power supply
Construction: UV-resistant plastic housing
Mounting: if required on wall/ceiling with magnetic holder/2 screws
Configuration: via Web App on Smartphone and PC
Data transmission: GPRS
SIM card (GSM): preconfigured standard SIM card (Mini-SIM 2FF), mobile network of Telekom Germany/provider freely selectable (prepaid/contract)
Data reception: via Web App on Smartphone/Tablet/PC; as push notification and email
Status messages: current measured values of temperature, humidity, battery value; transmission frequency freely selectable
Alarms (deactivatable): temperature and humidity at definable min./max. limit value; motion detection in definable time window; event at switching contact A and B; system messages
Downloads
Or are you looking for transmitters for local monitoring?
With radio transmission (500 m)
